The group of motors M077C/M077D can achieve what is noted here:
Motor Specification | ||
Model Number | M077C/M077D | |
Diameter | 81.5x81.5 squre | |
Length | 195 without output shaft | |
Shaft diameter | ≤15mm | |
Voltage | DC:12v-300V | AC:220/380V |
Speed | regular 800rpm-4000rpm | |
Rated Torque | Maximum 2.8N.M | |
Peak Torque | 8.4N.M | |
Insulation grade | F | |
IP Grade | Maximum IP65 | |
Phase number | Three phases | |
Hall angle | 120 degrees | |
Standard size | IEC D56/63 B3/B5/B14 | |
Recommended Controller
KBS-X series, light &flexible Controllers, small size for easy installation (12V-72V) (25A-55A continuous)
Ningbo EMP‟s programmable motor controllers provide efficient, smooth and quiet controls for BLDC motors speed or torque control. It uses high power MOSFET‟s and, PWM to achieve efficiencies of up to 99% in most cases. A powerful microprocessor brings in comprehensive and precise control to the controllers. It also allows users to adjust parameters, conduct tests, and obtain diagnostic information quickly and easily.
- 24 volt Brushless Motor
- 540W continuous rating
- 2000 rpm
The performance of an exact model:
IEC standard, or customized flanges and shafts are available
The group of motors M077C/M077D can achieve what is noted here:
Motor Specification | ||
Model Number | M077C/M077D | |
Diameter | 81.5x81.5 squre | |
Length | 195 without output shaft | |
Shaft diameter | ≤15mm | |
Voltage | DC:12v-300V | AC:220/380V |
Speed | regular 800rpm-4000rpm | |
Rated Torque | Maximum 2.8N.M | |
Peak Torque | 8.4N.M | |
Insulation grade | F | |
IP Grade | Maximum IP65 | |
Phase number | Three phases | |
Hall angle | 120 degrees | |
Standard size | IEC D56/63 B3/B5/B14 | |
Customised Solutions
Need a custom solution? All Ningbo EMP design and development work is performed in-house, with proven capabilities in product development for our customers, which allows us to provide any range of products from 12v-415v, 50w to 50,000w continuous, and all at your required speed.